Firmware Update

1.     Before updating the Pulser3 software, press the emergency stop button and turn off the main power switch after taking the necessary safety precautions.

2.     Request the "Pulser3.bin" file to update the Pulser3 software.

3.     If the file was sent as a .zip, extract it from the .zip archive.

4.     Gently press the micro SD card once in the forward direction to remove it from the Pulser3.

5.     Use an adapter to insert the micro SD card into your computer.

6.     Copy the "Pulser3.bin" file directly to the root directory (it should not be copied into any folder).

7.     Verify that the main power switch is turned off and insert the micro SD card into Pulser3.

8.     Turn on the main power switch.

9.     The screen of the Pulser3 CNC controller will display "Firmware Found" and "Signature OK." Wait for the Checking bar to fill. Once it is filled, "File OK" will appear, and the Writing bar will start to fill. After it is completed, the screen will display "SUCCESS," and the main software will be updated.